Bolse WiFi Adapter Driver [Direct Download Updated 2019]

If you want to download an updated Bolse WiFi Adapter Driver, it’s available for download on this page. Here you can see a picture of 300 megabytes per second Bolse WiFi wireless adapter buy from here  & the Panda Combo is here

 

Another Bolse Panda buy from here

Bolse Wifi Adapter Driver Installation:

Inside the box, you will find the Bolse WiFi wireless adapter disc I would like to tell you that first of all you have to put a CD on your laptop or computer then your computer will detect automatically.

Some of the operating systems installed it automatically but in some cases, you have to go into your My Computers then right-click on CD ROM & you have two options one is the autoplay and another one is to open the folder and choose your preferred operating system for the window.

If you are on Windows 7 click on the folder that names like Windows 7 and then you have to select out the 64 Bit and 32 bit whatever your computer is so that you can install it. If you don’t find CD in your box click here to download the driver for windows 7 in some cases

You found CD from box CD is empty so in that case, you have to download the given link

 

Bolse WiFi Adapter Driver Download For Windows 7:

http://bit.ly/All-Drivers

There are lots of people who ran into the issue of having no CD drive to get the driver and the in order to overcome this problem I am really thankful to the seller who quickly responded and provides a driver for my Bolse WiFi Adapter Driver.

Here above I am leaving some links to help you to download wi-Fi driver of your relevant system here is a link from where you can download the drivers these bolse wiFi adaptor drivers provided to me for this product. They will also work with Realtek USB Wi-Fi adaptors which are basically most of the devices in the market

 And for Linux you have to follow some other procedures to install this Bolse WiFi Adapter Driver to your operating system for Ubuntu users there are some commands that will help you for installing in your operating system

sudo apt purge rtl8812au-dkms
sudo apt install git
git clone https://github.com/gnab/rtl8812au.git
sudo cp -r rtl8812au /usr/src/rtl8812au-4.2.2
sudo dkms add -m rtl8812au -v 4.2.2
sudo dkms build -m rtl8812au -v 4.2.2
sudo dkms install -m rtl8812au -v 4.2.2

You can choose any of the following devices like

You should have luck using the attached drivers for any of the following devices with 150Mbps,300Mbps, 600Mbps, 900Mbps. Both 2.4 & 5GHz and AC300, AC600, AC900, AC1200+. 802.11ac / 802.11b / 802.11g / 802.11c devices should be good.

 

Bolse WiFi Adapter Driver Download for macOS

Download Bolse WiFi Adapter Driver using this link: http://bit.ly/BolsewifiMAC

These drivers were provided to me specifically for this product:
1200Mbps USB Wifi Adapter YOTECE Wireless Dual Band (2.4G/300Mbps+5G/867Mbps) Network wifi 3.0 Antenna Dongle Adapter for WIN 7 /8 / 8.1 /10 Mac OS X 10.7-10.12.4

Bolse Wifi Adapter Driver For Kali Linux

 Download from here http://bit.ly/Bolse-Wifi

Follow the steps

sudo apt-get install Realtek-rtl88xxau-dkms, verify it installs correctly by running the cmd again and this should say the below:

• Power down your Kali Machine
• Remove the USB adapter
• Boot until host OS is up and ensure USB is recognized (devices > USB)
• Start your virtualization platform (mine is Virtual box) in “settings” under “USB” leave the wireless adapter un-checked so it is not available when Kali boots.
  • Note repeat this when starting Kali normally, the un-known reason why Kali does not like the adapter being present when booting. (see below)

sudo apt-get update

sudo apt-get upgrade

If the “upgrade” fails as mine did then try with the below key:

sudo apt-key adv –keyserver hkp://keys.gnupg.net –recv-keys 7D8D0BF6

Add in USB adapter – In “Virtual Box” this is top menu bar “devices” > “USB” > and select your adapter

Note the failed upgrade is what seemed to stall my installation heavily so the above is key.

Note even when now added the below commands do not seem to register the adapter so we need to restart the network manager

ifconfig or iwconfig

To restart network manager follow the below:

sudo systemctl restart network-manager

Now if you try to list USB devices attached to the machine you should get a list as pictured below:

lsusb

If you now run the below commands you can see the adapter registered:

iwconfig ifconfig

You can then go ahead and change your MAC address and switch your network adapter in to monitor mode, for example:

ifconfig wlan 0 down 

macchanger –random 

ifconfig wlan 0 up

and

ifconfig wlan0 down 

iwconfig wlan0 mode monitor 

ifconfig wlan0 up 

iwconfig

Restarting Kali Machine

So that covers the first time install, but you will find that even when you restart Kali the adapter is not recognized and your iwconfig commands return no value. To get around this its simple just follow the below steps:

• Start Kali without the USB attached (under devices > USB)
• Wait for Kali to boot and login
• Add the USB device

sudo systemctl restart network-manager

• Then run to verify adapter is up and running

iwconfig

 

Chipset In Bolse Wifi Adapter

As most of the time when you talk about the wifi you worry about the chip with it made it.

The reason for that is basically the most important thing in the adapter is that chip that it made for so in this wifi adapter the chip is used to build is REALTEK 8814AU.

Realtek is the company that provides these types of networking chips that are using in wifi adapters.

 

Effect of Bolse Adapter on Internet Speed

If you already install this driver and going to use it then you realize that it doubles the speed of your internet because this is what it made for. You come to know that your connection is getting improved.

Two of my friend buy this and one day I went to their home and ask them about it he said this adapter make my expectations double because I thought that it will increase my speed at average rate but I am totally surprised when connecting ad check the speed I felt very happy when I get the speed of 145 MPs.

The only problem you get is installation but you can download the drivers from here. Overall he is very satisfied with this.

Benefits of Bolse Wifi Adapter with Windows 10

The most important thing is that if you have Windows 10 Operating System in your PC then there is no need of installation required just plug and play and use it.

But if you have Mac & another operating system then you have to download it and install it in your operating system. 

 

Best Netgear Dual Adapter Alternative

As Netgear is the most famous company in making wifi adapters and routers you can get these products everywhere. But this Blose wifi adapter even beat my dual-band Wifi adapter.

The reason for mine to changing this to that when I connect my laptop to 5GHz band that provides the fastest connection as compared to 2.4GHz but the problem with this adapter is that it not supported internal network cards.

So then I bought the Bolse wifi adapter of Techkey and it solved my problem I don’t even need to install the driver because my operating system is Windows 10 home.

So when you have to update all you have to go to the device manager and then click on update and you get updated. It triples my internet speed sometimes your internet speed is good but you don’t get full speed because of these devices so don’t worry.

Best Wifi Adapter Under $40 

If you are searching for best wifi adapter under 40$ then you are at the right place to, because this Bolse wifi adapter is very durable for your device.

This adapter has both 2.4GHz & 5GHz so after seeing the 5GHz you will understand that it is better in speed. And this adapter has a Realtek 8814au chip built in it that is very amazing in the networking process and provides you good results.

One thing is that you will get the same product as it is advertised on different pages but I suggest you buy it from amazon.if you need a small wifi tower then you are in right place.

You can also use it for performing different Linux activities because in most cases we are using a Virtual operating system then we have to use wifi adapter mostly, to perform some functions. In window 10 all you have to just plug an play and use it.

But in most other operating systems, you have to download the driver you can get the driver above. 

 

I hope you have downloaded and installed Bolse WiFi Adapter Driver easily on your computer. If you have any problems, feel free to comment down below, I will get back to you ASAP.